# SuperRack and Yamaha QL5

**URL:** <https://forum.waves.com/t/superrack-and-yamaha-ql5/9122>\
**Category:** Live Sound & Broadcast\
**Created:** [April 10, 2024, 2:07pm UTC](https://forum.waves.com/t/superrack-and-yamaha-ql5/9122 "2024-04-10T14:07:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![tech1](https://avatars.discourse-cdn.com/v4/letter/t/4bbf92/32.png) [@tech1](https://forum.waves.com/u/tech1)\
**Post date:** [April 10, 2024, 2:07pm UTC](https://forum.waves.com/t/superrack-and-yamaha-ql5/9122/1 "2024-04-10T14:07:50Z")

</div>

Hey everybody. I recently purchased SuperRack to use in the theater I work in and was messing around with it yesterday and ran into an odd issue. I used the insert on my LR and Sub channels to send to SuperRack. Everything seemed to be working just fine until I realized that my Sub send was now being sent to all outputs from SuperRack. I removed the insert and the issue went away so it is something within SuperRack I assume. What would cause this to happen?

I patched the LR as a stereo input on SuperRack and the Sub came in mono.

Thanks,  
Mark

---

<div class="post-metadata">

**Author:** ![Adi.Waves](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.waves.com/adi.waves/32/998_2.png) [@Adi.Waves](https://forum.waves.com/u/Adi.Waves)\
**Post date:** [April 11, 2024, 9:32am UTC](https://forum.waves.com/t/superrack-and-yamaha-ql5/9122/2 "2024-04-11T09:32:43Z")

</div>

Hi Mark,

Welcome to the Waves Forum.

One of our Live Sound representatives will be sure to contact you over the email to further assist with the reported behaviour.

---

<div class="post-metadata">

**Author:** ![pete.j](https://avatars.discourse-cdn.com/v4/letter/p/7ba0ec/32.png) [@pete.j](https://forum.waves.com/u/pete.j)\
**Post date:** [June 23, 2024, 1:48pm UTC](https://forum.waves.com/t/superrack-and-yamaha-ql5/9122/3 "2024-06-23T13:48:28Z")

</div>

How did you insert SuperRack? Did you use the internal DANTE?

Are you shire the DANTE return you used was only connected to the insert return of you Sub channel or are the some other destinations? Check via DANTE Controller!

Also be aware that QL uses the same DANTE stream for Inputs/Outputs (RIO/TIO etc.).

Best Peter