# Q-Clone 192kHz and 384kHz Sample Rate Support

**URL:** <https://forum.waves.com/t/q-clone-192khz-and-384khz-sample-rate-support/9513>\
**Category:** Feature Requests\
**Created:** [July 2, 2024, 2:28pm UTC](https://forum.waves.com/t/q-clone-192khz-and-384khz-sample-rate-support/9513 "2024-07-02T14:28:03Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![CH1](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@CH1](https://forum.waves.com/u/CH1)\
**Post date:** [July 2, 2024, 2:28pm UTC](https://forum.waves.com/t/q-clone-192khz-and-384khz-sample-rate-support/9513/1 "2024-07-02T14:28:03Z")

</div>

There is an important feature missing for us who use Q-Clone.

Since Q-Clone is used with external hardware, the highest resolution is important.  
Once 96kHz was enough, but now I mix at 192 and 384 sample rates using hardware and recording.

But Q-Clone is only 96kHz, which means it doesn’t show up in the plugin menus for a 192 or 384 sample rate Pro Tools session.

At some point, can you please add 192kHz and 384kHz sample rate support for Q-Clone.  
It’ll be a nice upgrade.

Thanks

---

<div class="post-metadata">

**Author:** ![henryolonga](https://avatars.discourse-cdn.com/v4/letter/h/f08c70/32.png) [@henryolonga](https://forum.waves.com/u/henryolonga)\
**Post date:** [August 9, 2024, 12:19am UTC](https://forum.waves.com/t/q-clone-192khz-and-384khz-sample-rate-support/9513/2 "2024-08-09T00:19:25Z")

</div>

Yes, yes, yes!!! This - louder

---

<div class="post-metadata">

**Author:** ![CH1](https://avatars.discourse-cdn.com/v4/letter/c/db5fbb/32.png) [@CH1](https://forum.waves.com/u/CH1)\
**Post date:** [October 20, 2026, 5:59am UTC](https://forum.waves.com/t/q-clone-192khz-and-384khz-sample-rate-support/9513/3 "2026-10-20T05:59:36Z")

</div>

192kHz support has become even more important to [Q-Clone](https://www.waves.com/plugins/q-clone?utm_source=forum) today more than ever

Please give this plug-in a needed update!