# Keep sends on fader when changing modes in LV1

**URL:** https://forum.waves.com/t/keep-sends-on-fader-when-changing-modes-in-lv1/6447
**Category:** Feature Requests
**Created:** [December 30, 2022, 2:02pm UTC](https://forum.waves.com/t/keep-sends-on-fader-when-changing-modes-in-lv1/6447 "2022-12-30T14:02:35Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![mattgalland](https://avatars.discourse-cdn.com/v4/letter/m/b38774/32.png) [@mattgalland](https://forum.waves.com/u/mattgalland)
#### Post date: [December 30, 2022, 2:02pm UTC](https://forum.waves.com/t/keep-sends-on-fader-when-changing-modes-in-lv1/6447/1 "2022-12-30T14:02:35Z")

</div>

Currently, every time we’re in sends on fader and go to a different option in the list under Modes, the desk comes out of sends on fader. For example if you go to view and change the channel trim it clears the sends on fader.

There’s a workaround by going to the channel page and altering it there, but would be better if we could do it in the mixer page sometimes.

---

<div class="post-metadata">

### Author: ![strobelightaudio](https://yyz1.discourse-cdn.com/flex027/user_avatar/forum.waves.com/strobelightaudio/32/2202_2.png) [@strobelightaudio](https://forum.waves.com/u/strobelightaudio)
#### Post date: [September 8, 2026, 7:05pm UTC](https://forum.waves.com/t/keep-sends-on-fader-when-changing-modes-in-lv1/6447/2 "2026-09-08T19:05:00Z")

</div>

I ran into this, check “Latch Aux Mode” in U/I settings.